Reply
Posts: 7
Registered: ‎05-27-2013

New EFM32 Pearl and Jade Gecko devices launched!

Hi everyone,


I'm excited to announce that two new members of the Pearl and Jade Gecko families launched today -  PG12 and JG12:

 

http://news.silabs.com/press-release/corporate-news/gecko-microcontrollers-get-big-boost-security-me...

 

These new devices extend Pearl and Jade Gecko to 1MB flash, 256KB RAM, and add new on-chip peripheral and security features.  Learn more about them here:

http://www.silabs.com/pearlgecko
http://www.silabs.com/jadegecko

 

Regards,

Ted

Posts: 47
Registered: ‎01-04-2010

Re: New EFM32 Pearl and Jade Gecko devices launched!

Hello,

JG12 and PG12 looks very interesting for me.

Order samples, prepare PCB and now wait...

May be you increase samples amount from 2 to 5 ?

 

Thanks !

 

Posts: 7
Registered: ‎05-27-2013

Re: New EFM32 Pearl and Jade Gecko devices launched!

Hi,

 

Thanks for your interest!  I will relay your suggestion to our team that manages samples.  In the meantime, if you need more you can buy individual parts on the major web distributor sites, such as Digikey or Mouser.  I just checked and they are in stock at both.

 

Regards,

Ted

Posts: 2
Registered: ‎03-18-2015

Re: New EFM32 Pearl and Jade Gecko devices launched!

Hi,

I just obtain a development KIT

SLSTK3402A for PG12, but I don't know to install  any code examples for this KIT.

 

in folder

c:\SiliconLabs\SimplicityStudio\v4\developer\sdks\exx32\v4.4.1\kits\

 

are only subfolder SLSTK3401A_EFM32PG

Are there any code examples for this family chip?

 

Martin

 

 

Posts: 332
Registered: ‎02-26-2013

Re: New EFM32 Pearl and Jade Gecko devices launched!

Hi @MartinS,

 

v4.4.1 is an old version of the SDK that does not have the PG12 examples. I suggest updating or reinstalling Studio so that you have the newer Gecko SDK Suite.

 

Once updated, the PG12 examples will be located:

C:\SiliconLabs\SimplicityStudio\v4\developer\sdks\gecko_sdk_suite\v1.0\app\mcu_example\SLSTK3402A_EFM32PG12

 

If you still have issues, I suggest starting a new thread or submitting a support request (https://www.silabs.com/support > Email Support Request).