Reply
Posts: 1
Registered: ‎04-23-2017

MCU Selection problem

 Hello. sir

 I am going to make a prototype so that I can use some sensors(3ea, 2 I2C, 1 UART)and read the measured values to the mono LCD(3~4line), In addition, Bluetooth can be used.

Product development is determined after the prototype is developed and reviewed.
Please let me know.
Which chip would you recommend?
 
Thank you. sir
 
Posts: 2,326
Registered: ‎10-14-2014

Re: MCU Selection problem

What do you mean by 3ea? do you mind to give some link to introduce this interface?

I guess the mono LCD would use SPI interface.

You could have a look on below link to see if EFR32BG could meet your requirement.

https://www.silabs.com/products/wireless/bluetooth/blue-gecko-bluetooth-low-energy-socs

You could also try our parametric search tool to see which part could meet your requirment here:

https://www.silabs.com/products/parametric-search/wireless-gecko

WeiguoLu